KH-10 is a PU heat stabilizer. It is used for PU foam, slurry, shoe sole raw liquor and other PU downstream products, it can improve heat resistance during the production, and can effectively inhibit PU redness due to too high nitrogen oxide concentration.
Recommended dosage is 0.5-1%, specific dosage should be determined by actual customer condition.
Physical Properties
Appearance: Light blue liquid
PH: 6.5-7
Viscosity (25℃): 5000-7000mpa.s
Instruction for Use
Add directly to polyether polyol and stir evenly. KH-10 is nonflammable and nontoxic. If contacts with skin, please rinse clean using general cleaning supplies.
Send Email
Betty Zeng
+8613715321452